Street lights manufacturer and supplier today? Our LED light fixture can be divided into indoor LED lighting and outdoor LED lighting according to the place where LED lamps are used. Indoor lighting requires high brightness, good color consistency, high color rendering, and high versatility. Outdoor lighting requires high brightness, long life, and good resistance to harsh environments. Our LED lamps feature high luminous efficiency, low energy consumption, long life, safety, and environmental protection. They can operate for more than 50,000 hours without failure, widely used in factories, warehouses, shopping malls, roads and other public places that require long-term lighting. Find more details at street light factory.
LED garden lights are a kind of outdoor lighting. It uses a new type of LED semiconductor as the illuminant. It usually refers to the outdoor lighting that illuminates an area less than 6 square meters. Its main components include an LED light source, enclosure, pole, and flange. The disc and the basic embedded parts are composed of 5 parts. It is mainly used to light up large-area mines, building outlines, stadiums, overpasses, monuments, parks, and flower beds. In fact, almost all large-area lighting fixtures used outdoors can be regarded as spotlights. Applicable occasions: Suitable for shopping malls, exhibition halls, parking lots, playgrounds, gyms, parks, building facade and public corridor, stair corridor and other indoor and outdoor lighting.
The LED tube uses a light-emitting diode as a light source, which has higher luminous efficiency, is more energy-saving, has a longer service life, and is more environmentally friendly. It is the ideal product to replace fluorescent tubes at this stage. The LED tube and the traditional fluorescent lamp are the same in the outer size. There are T5 tube, T8 tube and T10 tube. The length is 0.6m, 0.9m, 1.2m, 1.5m, 1.8m, 2.4m. The installation of the LED tube is very simple. When installing, the original fluorescent lamp is removed and replaced with the LED tube, and the ballast and the starter are removed, so that the 220V AC mains can be directly applied to the ends of the LED tube.
Enclosure: Using efficient Fishbone radiator with elegant appearance. The die-cast aluminum housing is electrostatically sprayed, sprayed with a polyester powder coating, treated with an anti-corrosive primer, and cured in a 180oC oven. Cable: Using silicone rubber cable for safe and efficient power input. It is secured in the cable gland with screws. Warranty: 5 year warranty for the entire lamp. Do not attempt to disassemble the casing as this will break the seal and invalidate all warranties. Certificates: ENEC, TUV, and RoHS. Quality Control: Strict testings including high and low temperature testing, waterproof testing, shock testing, aging testing, tensile testing, salt spray testing, are conducted to ensure long-term performance.
Discover extra information at https://www.chz-lighting.com/.
The indoor table tennis room originally used 36 1000W lighting light boxes, the glare was serious and unevenly distributed, and the field illumination was less than 100lx, which was not conducive to the development of table tennis. In order to ensure the professionalism of table tennis lighting,CHZ-LIGHTING uses 124 36W professional anti-glare LED panel lights, which are made of special water chestnut plates, UGR<19, and are reasonably arranged above the venue. After testing, the average illuminance of the venue is above 300lx, the uniformity is above 0.6, the light is soft and bright, and there is no glare interference. The healthy eye-protecting light makes the eyes more comfortable.
The following are some of the specifications used to differentiate street lights from other sources of light. Operating Temperature: This refers to the optimal temperature at which these lights operate. This specification is key to all outdoor lamps. The lamps are usually helpful at night. Therefore, on average, these lamps operate at a low temperature of up to 2 degrees Celsius. The manufacturers have significantly factored in the fact that the lights can be installed in areas that experience winter seasons each year. The modular LED street light uses a die-cast aluminum shell, which has strong heat dissipation capacity and greatly improves the heat dissipation efficiency. In addition, the LED lamp beads inside the luminaire are separated and dispersed, which reduces the heat accumulation inside the luminaire and is more conducive to heat dissipation. LED street lights have good heat dissipation and natural long service life.
