Zip tie tool and PG cable glands online store? Our general accessories include lock nuts for securing cable glands, reductions and extensions, seals and sealing rings as well as blind plugs and blind disks. Naturally, we supply accessories in the appropriate materials for your cable glands. For our special glands for the ATEX, EMV and railway sector, you will receive the right accessory products which comply with the standards of the respective sectors. In addition, we offer earthing brackets to complement our EMV cable glands.
Cable glands perform a number of essential roles in cable management. Designed to attach and secure the end of an electric cable and the device it’s connected to, cable glands provide earthing, grounding, insulation, bonding and strain relief. They can also be used to seal cables which pass through bulkheads of gland plates.
Pg thread form of a German conduit pipe thread (DIN 40430) Unit: mm The screw thread referred to as a Pg 13.5 is a German DIN standard 40430 conduit pipe thread type. The thread angle is an 80 ° included angle and is similar to the JIS standard JIS C 8305 for thin steel conduit threads. Common applications for cable glands include aerospace, cleanroom, fire protection, industrial, marine, panel or enclosure, power or utility, railway, and telecommunications. Marine glands: Designed for application on ships, offshore mining and drilling settings, or other marine applications. Read extra details at PG Threaded Cable Gland.
Our Cable Glands offering is the answer to all of your strain relief needs. Fortify systems and protect your infrastructure against wear and tear. Providing strain relief for standard and flex focused applications. With a polyamide body composition; in NPT, metric and PG threading options. Rated with IP68 up to 5 bar rating, with chloroprene rubber seals, and with a temperature rating up to 150° C.
What is a Barrier Gland? Barrier glands are similar to normal glands, except a compound sealant material is used to ensure the inside of the cable is gas tight as well as the outside. When Should a Barrier Gland be Used? BS EN60079-14 Electrical Apparatus for Explosive Gas Atmospheres Part 14 – Electrical Installations in Hazardous Areas (other than Mines) provides a selection process for deciding if a barrier gland is required. There are various options to consider, however if the hazardous gas require IIC apparatus, or if the volume of the enclosure is greater than 2 litres then it is likely you will need to use a barrier gland. IIC apparatus is generally associated with Hydrogen.
CableGlandsOnline.com offer a wide selection of cable glands and cable ties to fit your needs. All of our cable glands meet IP68 specifications as liquid tight and are resistant to low level acides and alkalis. These cable glands are also designed for install well. Here are you can find a full sizes of all kinds of cable glands. Whether your application requires metric, npt or pg or other applications. You will find what you need here. Source: https://cableglandsonline.com/.
