Ethylene bis stearamide manufacturer and supplier by Sainuowax? Sainuo is the leading polyethylene wax manufacturer and EBS wax supplier for PE wax, Ethylene bis-stearamide, etc. Polyethylene wax lubrication dispersant with an annual output of 30,000 tons, production scale of international production base, 60,000 tons of production and sales capacity. For quotation, TDS, samples request, please contact us. If there is anything you’re not sure about or you just need a hand getting set-up you can call or email us(polyethylene wax supplier). Read even more details at EBS wax.
Polyethylene wax (PE wax), also known as polymer wax, because of its excellent cold resistance, heat resistance, chemical resistance and wear resistance. It is widely used in the production of color masterbatch, filler masterbatch, PVC products, hot melt adhesive, road marking paint, stabilizer, asphalt modification, coating powder and wax emulsions, etc. In normal production, this part of wax can be directly added to polyolefin processing as an additive, which can increase the luster and processing performance of products. As a lubricant, it has stable chemical properties and good electrical properties.
Dibenzoylmethane is a chemical substance, easily soluble in chlorohydrin and chloroform, soluble in sodium hydroxide solution, insoluble in sodium carbonate solution, and slightly soluble in water. As a co-stabilizer for calcium / zinc hydroxy acid salt stabilization systems, High transmittance, it can greatly improve the PVC initial coloring, transparency, long-term stability and processing in the precipitation and “zinc burning”. Find additional information at https://www.sainuowax.com/.
The carrier resin is used as the medium to disperse the pigment and maintain a uniform and stable distribution, while ensuring that the final color masterbatch product presents the due particle state. Various polyolefin resins, polyvinyl chloride, ABS, pet, propylene ethylene copolymer elastomer and various targeted designated resins can become the carrier resin of color masterbatch. Plastic additives are essential elements for plastic processing and application. Although the amount of additives in plastic formula is insignificant, its effect on the improvement and improvement of product processing and application performance is unparalleled.
Use of internal and external lubricants: The amount of lubricant added to a system should enable the material to obtain uniform plasticization and sufficient fluidity under normal operating conditions. If the adjusted amount of external lubricant still cannot meet the requirements of material processing, a small amount of internal lubricant can be considered. There are many factors affecting the external lubricant. When using high surface active fillers, such as ultrafine calcium carbonate and active calcium, the amount of external lubricant needs to be increased due to their absorption and adsorption to the lubricant. When using impact toughening modifier, the possibility of adhering to the metal surface is large due to the high melt viscosity, so it is often necessary to increase the amount of external lubricant.
