Professional roof maintenance service and advices near Folkestone, Kent? Of course, during a proper roof inspection, we inspect all roofing materials such as shingles and wood shakes. For asphalt shingles, we will check to see if any granules are missing from the rubbing of tree branches or severe weather conditions. We will also check for buckling or any types of issues with the seams in between shingles, as these problems can cause water to pool in areas and it will eventually leak onto your ceiling or even into the home. We will inspect wood shakes to check for mold, dry rot or insect infestations. We will make sure that all wood has been properly treated to avoid these issues and we can also employ preventative measures for future protection. Read additional info on see more.
Replace the roof sealant as needed. Inspect every area of the roof where there is sealant and identify any signs of cracking or wear and tear. If present, you will need to remove the old sealant completely and apply new sealant in each area. As you go about routinely inspecting your roof, be on the lookout for trees that are growing near your home. If there are branches hanging too closely to or directly above your roof, they need trimming. The reason is that falling leaves will collect on the roof, retain moisture and then start to rot your tiles, making them much weaker. If this remains unsolved for a long time, it may result in even more damage to the entire roofing structure.
A common question we get is: What Are The Best Roofing Tiles to Buy? Many homeowners think that concrete roof tiles are the most durable, and there is a chance you have seen many homes with these types of tiles. And while they are commonplace and popular in terms of roofing options, they are not necessarily the best option to go with. Here is what you need to know about concrete roofing tiles, some of the common concrete roof tile problems you may encounter, and a solution that eliminates all of the potential issues.
Undertaking work yourself can allow you to control costs and quality, but don’t be over-ambitious and plan to do more work than you really have time – or the skill – to undertake successfully. You could end up slowing the whole project down and living in a building site for years, which can in turn lead to family conflicts and potentially to accidents. Bad DIY will also cost you dearly, slowing down the other trades, wasting materials, sometimes causing work to be done twice, and ultimately devaluing the property if it is not put right. You can get so tied up in DIY work that you lose focus on running the project and keeping up with decisions.
If there are any large issues with your home project, take a few days, and do your homework. We were told early on that we couldn’t have a gas stove in our home and designed the house accordingly. Once the project was completed, we found out that our neighbors on all three sides had gas stoves and the functionality was clearly available for our street. Don’t blindly trust when someone tells you that something can’t be done or that this is “the best price available” – do your homework.
According to the National Roofing Contractor’s Association, homeowners should have their roofs professionally inspected at least twice a year — once in the fall to check on any damage the summer sun and storms may have caused, and once in the spring to see if winter weather took its toll on your roof. Checking in on the state of your shingles, gutters, flashing, and protrusions is important for maintaining good roof health. Once those start to wear down, costly repairs start to build up. If you notice open gaps or loose roof materials during your spring inspection, make sure to call a licensed contractor so your roof can get ahead of the damage before summer storms wear them down even more.
